Volcano Digit Replacement Switch combo.
Includes Torx T8 and T10 Tamper Resistant Screwdrivers and 3(2mm) replacement case screws.

• 1 Red and 1 Green OEM Replacement Momentary Switch fits Volcano Digit.
  Note, Replacement switch top will have solid color top as pictured
  • Model R13-527-(G),(R) -110V
  • 10 A 125 VAC, 8 A 250 VAC
  • Momentary ON 2 pins - Cap Color Green / Red
  • Fits Volcano Digit - May Also be used in in Bissell (37603) and Dyson Vacuums, Coffee Makers etc.
    
• 1 Torx T8 Security Screw Driver to remove the Volcano Case Screws. 
• 1 Torx T10 Security Screw Driver tool in case your Volcano came with T10 Screws. 
•  3 Stainless steel replacement screws.
  
  • T8 Torx / 2mm Allan Hex head size.
  • These screws do not require a security tamper resistant tool. Yes the tool provided in the kit fits these screws.
    
  • Warranty is good for 30 days after your receipt. Please contact us if you need a replacement with in the 30 days.
    

Replacement Momentary Switch for your Volcano Digit. Green / Red momentary on switch 10 A 125 VAC.

Easy replacement at home no need to ship off your Volcano. Simply pop out your broken switch, pop in your new switch and plug in the 2 wires. You will be up and running in minutes..

Note, this item is not authorized for resale without our prior written consent.  Please beware of imposters selling our wares,  buy your Volcano replacement switch from DepotEco.

Limit 2 combo's per customer please. See Link Below for installation.

Volcano Switch Replacement Instructions

CSA Standards

Certified to CAN / CSA C22.2 No. 55:
This is the switch standard for Canada designed to go into other low voltage (below 600V) appliances. This receive the “CSA Mark” or if combined with a USA approval, the “cCSAus Mark”.

Certified to ANSI / UL 1054:
This is the switch standard for the USA for UL recognized component switches designed for low voltage (below 600V) appliances.  This will get the “CSAus mark” or if combined with a Canada approval, the “cCSAus Mark”