volcano_switch
Fits Volcano Classic and Bissell 37603 Vacuums SR-06NR-G 16 A 125 VAC, 8 A 250 VAC
- Replacement rocker switch fits Volcano Vaporizer.
- Model SR-06NR-G-110V Illuminated rocker switch
- 16 A 125 VAC, 8 A 250 VAC
- ON - OFF 3 pins - Light 110 VOLTS
- Fits Volcano Classic - Also Found in some Bissell 37603 Vacuums
Replacement Rocker Switch for your Volcano Vaporizer Classic. Green illuminated rocker switch 16 A 125 VAC Easy Replacement at home no need to ship off your Volcano, Simply pop out your broken switch, pop in your new switch and plug in the 3 wires. You will be up and running in minutes.
5.0 out of 5 stars Perfect Volcano Vaporizer replacement!
By Trip.fontaineon November 6, 2012
Verified Purchase
This is the perfect replacement for a Volcano Vaporizer (circa 2008) rocker switch. Both my HEAT and AIR buttons went lame after about 4 years of 365 day use. They would still switch on and off, but I'd have to keep pressure to one side, and be gentle. Enough of that nonsense...FOLLOW THESE INSTRUCTIONS
1. Use a size 8 Torx security bit to remove the screws, and remove the stainless steel cover. Be gentle. Mine had a wire attached at the back, only allowing me to remove it so far.
2. Remove the wires from the male ends of the old rocker switch. This took me quite a while, and it became clear that they didn't want the average Joe messing with it. So I used an exact-o blade to cut the plastic housings covering the connection point. Then I was able to use needle nose pliers to remove the wires at the connection point. I kept the plastic housing to put back on after.
3. Remove old rocker switch. I just broke the plastic spring piece to get it out. You can remove it and keep it in tact, but its much more difficult and involves a lot of awkwardly placed finger pressure. Pop the old one out, but don't throw it out yet!
4. **IMPORTANT** Remove the BLACK RUBBER RING from your old switch. The new ones (however awesome) DON'T have them, so it's a keeper, and worth its weight in gold. Now place it on the new rocker switch. It will fit like a dream only because of this o-ring piece.
5. Make sure you have your switch facing the right direction, because you only get one shot at the next part. Pop it in, and attach the wire connections CORRECTLY!
6. Use something wet to clean all the dust from the inside of the machine, and thank your lucky stars. You just gave your Volcano Vaporizer another 4 years of life. I love you Germany. I love you for producing the BMW of Vaporizers...
1. Use a size 8 Torx security bit to remove the screws, and remove the stainless steel cover. Be gentle. Mine had a wire attached at the back, only allowing me to remove it so far.
2. Remove the wires from the male ends of the old rocker switch. This took me quite a while, and it became clear that they didn't want the average Joe messing with it. So I used an exact-o blade to cut the plastic housings covering the connection point. Then I was able to use needle nose pliers to remove the wires at the connection point. I kept the plastic housing to put back on after.
3. Remove old rocker switch. I just broke the plastic spring piece to get it out. You can remove it and keep it in tact, but its much more difficult and involves a lot of awkwardly placed finger pressure. Pop the old one out, but don't throw it out yet!
4. **IMPORTANT** Remove the BLACK RUBBER RING from your old switch. The new ones (however awesome) DON'T have them, so it's a keeper, and worth its weight in gold. Now place it on the new rocker switch. It will fit like a dream only because of this o-ring piece.
5. Make sure you have your switch facing the right direction, because you only get one shot at the next part. Pop it in, and attach the wire connections CORRECTLY!
6. Use something wet to clean all the dust from the inside of the machine, and thank your lucky stars. You just gave your Volcano Vaporizer another 4 years of life. I love you Germany. I love you for producing the BMW of Vaporizers...
5.0 out of 5 starsFive Stars
By Renee Hoffmanon December 30, 2016
Verified Purchase
Perfect replacement hot switch packed well works came fast !!!!!!
5.0 out of 5 stars works great
By Balance776on January 27, 2015
Verified Purchase
Finally had to use one of these spare switches, and am happy to report it works exactly as intended.
The old switch was a bear to remove (not surprising), but this replacement popped right in and I was able to connect it with no problems.
The old switch was a bear to remove (not surprising), but this replacement popped right in and I was able to connect it with no problems.
5.0 out of 5 starsswitch arrived as ordered, easy to install
By Steve in Atlantaon January 30, 2014
Verified Purchase
The switch was a exact replacement for the volcano and easy to install. To keep track of the connections I numbered them 1,2,3 as I removed them from the old switch. I had to gently pry the out switch out the front with a thin slotted screw driver after disconnecting the wires.
5.0 out of 5 stars Worked great.
ByJalewon September 24, 2014
Verified Purchase
I tried others but ended up just getting one of these. Worked great.
5.0 out of 5 stars It works and fits the stock housing,
By Hunter A.on November 6, 2017
Verified Purchase
It works and fits the stock housing, same fit as OEM
5.0 out of 5 stars Worked perfectly - easy to install/replace.
By Animalon May 29, 2015
Verified Purchase
Worked perfectly - easy to install/replace.
5.0 out of 5 stars Awesome
ByDan Marinoon January 3, 2013
Verified Purchase
This product is good good good good good good good good good good good good really good it works good good good good yes~
5.0 out of 5 stars Good Replacement
By Jack Burchamon April 17, 2013
Verified Purchase
The switch is a well made replacement and was easy to replace. You will need a set of security screw driver set.
5.0 out of 5 stars Five Stars
By Jimmyon September 2, 2014
Verified Purchase
Worked great for me as a replacement switch!